www.wysiwygwebbuilder.com

Hi all...I have been sailing along with few issues but today when I edited my website and attempted to publish I get this: to me it might as well be written in Swahali!

Any suggestions?

*** START OF PUBLISH ***
Scanning publish folder...
Found 12 file(s).
SecureFtpLog:
Connect_Ftp2:
DllDate: Jan 31 2018
SecureFtpVersion: 9.5.0.72
UnlockPrefix: PBLVND.CB1072018
Architecture: Little Endian; 64-bit
Language: Visual C++ 2015 / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 1
AuthSsl: 0
ftpConnect:
Hostname: 103.27.34.107
Port: 21
IdleTimeoutMs: 60000
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 100 allowed.
replyLineQP: 220-Local time is now 22:04. Server port: 21.
replyLineQP: 220-This is a private system - No anonymous login
replyLineQP: 220-IPv6 connections are also welcome on this server.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 100 allowed.
220-Local time is now 22:04. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 15 minutes of inactivity.
converting to secure connection...
authTls:
simpleCommand:
sendCommand:
sendingCommand: AUTH TLS
--sendCommand
readCommandResponse:
replyLineQP: 504 Command not implemented for that parameter
--readCommandResponse
--simpleCommand
--authTls
--ftpConnect
Failed to connect to FTP server.
Failed.
--Connect_Ftp2
--SecureFtpLog



Removing temporary files...
Publish failed!
*** END OF PUBLISH ***

If you did not change anything yourself then maybe your webhost has changed something?
For example, maybe they have switched to Secure FTP, but you did not update your settings?

Thanks Pablo...I'll check.

Helpful folk, a month ago I asked for assistance when I had trouble publishing....the publish error log presented a lot of info that made little sense to me...it was suggested that my webhost may have changed something...I queried them and they said nothing had changed...without me doing anything it corrected itself...now, it has done it again...a copy of my logfile is below....I would appreciate any comments or suggestions,
Many thanks
Paul

16/04/2022 20:18:33.989 *** START OF PUBLISH ***
16/04/2022 20:18:33.990 Scanning publish folder...
16/04/2022 20:18:33.994 Found 12 file(s).
16/04/2022 20:18:34.419 SecureFtpLog:
Connect_Ftp2:
DllDate: Jan 31 2018
SecureFtpVersion: 9.5.0.72
UnlockPrefix: PBLVND.CB1072018
Architecture: Little Endian; 64-bit
Language: Visual C++ 2015 / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 1
AuthSsl: 0
ftpConnect:
Hostname: 103.27.34.107
Port: 21
IdleTimeoutMs: 60000
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 100 allowed.
replyLineQP: 220-Local time is now 21:18. Server port: 21.
replyLineQP: 220-This is a private system - No anonymous login
replyLineQP: 220-IPv6 connections are also welcome on this server.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 100 allowed.
220-Local time is now 21:18. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 15 minutes of inactivity.
converting to secure connection...
authTls:
simpleCommand:
sendCommand:
sendingCommand: AUTH TLS
--sendCommand
readCommandResponse:
replyLineQP: 504 Command not implemented for that parameter
--readCommandResponse
--simpleCommand
--authTls
--ftpConnect
Failed to connect to FTP server.
Failed.
--Connect_Ftp2
--SecureFtpLog

16/04/2022 20:18:34.659 SecureFtpLog:
Connect_Ftp2:
DllDate: Jan 31 2018
SecureFtpVersion: 9.5.0.72
UnlockPrefix: PBLVND.CB1072018
Architecture: Little Endian; 64-bit
Language: Visual C++ 2015 / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 1
AuthSsl: 0
ftpConnect:
Hostname: 103.27.34.107
Port: 21
IdleTimeoutMs: 60000
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 100 allowed.
replyLineQP: 220-Local time is now 21:18. Server port: 21.
replyLineQP: 220-This is a private system - No anonymous login
replyLineQP: 220-IPv6 connections are also welcome on this server.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 100 allowed.
220-Local time is now 21:18. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 15 minutes of inactivity.
converting to secure connection...
authTls:
simpleCommand:
sendCommand:
sendingCommand: AUTH TLS
--sendCommand
readCommandResponse:
replyLineQP: 504 Command not implemented for that parameter
--readCommandResponse
--simpleCommand
--authTls
--ftpConnect
Failed to connect to FTP server.
Failed.
--Connect_Ftp2
--SecureFtpLog

16/04/2022 20:18:34.902 SecureFtpLog:
Connect_Ftp2:
DllDate: Jan 31 2018
SecureFtpVersion: 9.5.0.72
UnlockPrefix: PBLVND.CB1072018
Architecture: Little Endian; 64-bit
Language: Visual C++ 2015 / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 1
AuthSsl: 0
ftpConnect:
Hostname: 103.27.34.107
Port: 21
IdleTimeoutMs: 60000
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 100 allowed.
replyLineQP: 220-Local time is now 21:18. Server port: 21.
replyLineQP: 220-This is a private system - No anonymous login
replyLineQP: 220-IPv6 connections are also welcome on this server.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 100 allowed.
220-Local time is now 21:18. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 15 minutes of inactivity.
converting to secure connection...
authTls:
simpleCommand:
sendCommand:
sendingCommand: AUTH TLS
--sendCommand
readCommandResponse:
replyLineQP: 504 Command not implemented for that parameter
--readCommandResponse
--simpleCommand
--authTls
--ftpConnect
Failed to connect to FTP server.
Failed.
--Connect_Ftp2
--SecureFtpLog

16/04/2022 20:18:34.975 Removing temporary files...
16/04/2022 20:18:34.997 Publish failed!
16/04/2022 20:18:35.011 *** END OF PUBLISH ***

without me doing anything it corrected itself

This confirms that there is no issue with the software otherwise it would not suddenly work again. The software works the same every time you use it.
So, there is either an issue with the server or maybe your firewall blocks the connection?

I have had that happen to me a few times, it was a bad connection to the FTP server.

Thanks KingSparta...what did you do to correct it?

Paul

for some reason my internet was down, I confirmed it by running my FTP program FileZilla and getting no connection there also.

I just waited, and my internet came back up.

I think I would get the same error if the server was down.

I was worried at first

Thank you...I am also unable to connect in FileZilla and it has been like that for 2 weeks now!...In all other aspects the connection to the Internet, including my Cpanel, appears fine.

I am at a total loss of what to do.

Paul.

if you can't get on your site thru an FTP program, it is not WYSIWYG, If I were you I would get with your provider to find out what is wrong. I had to do that once and they were very helpful I had a setting wrong.

Thanks KingSparta....I am on to them now, thanks for you help anyway.