Hi
I have two projects with slide shows.
In both projects I have:
Type: carousel
Pause: 0
Animations: No.
In one project, the image changes and in another it doesn't change. What could be the reason?
https://www.fotografiamanresa.es/imprem ... etons.html
https://www.fotografiamanresa.es/sessio ... studi.html
Tnk's
Carousel
Forum rules
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
Re: Carousel
If you set the pause time value to 0 (zero), the images will not rotate automatically, but instead you have to use Events to display the next or previous image.
Re: Carousel
Make sure both carousels have the same configuration for transitions and events. If one has Events set up and the other doesn't, that could explain the difference in behavior. Good luck!
- BaconFries
-
- Posts: 5669
- Joined: Thu Aug 16, 2007 7:32 pm
Re: Carousel
See the following tutorial for using events in the Carousel.
How to use the Carousel?
How to use the Carousel?
-
-
- Posts: 112
- Joined: Sat Apr 25, 2020 5:17 pm
- Contact:
Re: Carousel
thanks to all.
Time value: 0(zero). I don't want it to move automatically, I want it to move manually with the controls.
Configuration: I have checked the configuration and it is the same in all of them.
How to use Carousel: I have checked and I don't see why the difference.
Test performed:
I have opened the project that works manually (as I want), I have copied the Carousel and pasted it into the project that changes automatically, where it works manually, in the second project the operation changes to "automatic".
I understand that there is something different in the configuration of the two projects, I have compared and I can't see it.
In the Events and Animations section, there is nothing.
Tnk's
Time value: 0(zero). I don't want it to move automatically, I want it to move manually with the controls.
Configuration: I have checked the configuration and it is the same in all of them.
How to use Carousel: I have checked and I don't see why the difference.
Test performed:
I have opened the project that works manually (as I want), I have copied the Carousel and pasted it into the project that changes automatically, where it works manually, in the second project the operation changes to "automatic".
I understand that there is something different in the configuration of the two projects, I have compared and I can't see it.
In the Events and Animations section, there is nothing.
Tnk's
Re: Carousel
If you need further assistance then please share a demo project.
I do not need the complete project because that will only take more time to figure out what you have done.
Basically, I just need a small project with one page and object(s) that are relevant to your question.
For further details about how to share a project file, please see this FAQ:
viewtopic.php?f=10&t=82134
I do not need the complete project because that will only take more time to figure out what you have done.
Basically, I just need a small project with one page and object(s) that are relevant to your question.
For further details about how to share a project file, please see this FAQ:
viewtopic.php?f=10&t=82134
-
-
- Posts: 112
- Joined: Sat Apr 25, 2020 5:17 pm
- Contact:
Re: Carousel
I don't know what I did, but it works now. !! Thank you very much for your time.
Tnk's
Tnk's