master frame problem

All WYSIWYG Web Builder support issues that are not covered in the forums below.
Forum rules
IMPORTANT NOTE!!

DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.



PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901

MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
Post Reply
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

master frame problem

Post by TREZA13 »

Hello
I work on my master frame
I had a lot of trouble to make her responcive, I searched a lot, I found I do not know how but it works. I had a different format between the head and the footers, and the content place holder. Do you have a clear procedure.
second dificulty, when I publish, the content place holder is positioned under the header page and I can not find the solution.
sorry for my bad English .
your help will be welcome
User avatar
Pablo
 
Posts: 21574
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: master frame problem

Post by Pablo »

Maybe this tutorial will be helpful? It includes a responsive example.
http://wysiwygwebbuilder.com/master_frame.html

Or else:
http://wysiwygwebbuilder.com/master_page.html
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

Thank you pablo for your reponce I had already read these tutorials, I just read them again I even saw the very good tutorials on yotube Herman Pena.
When I publish my frame do not come to position themselves in the content place holder.
Yet,however, I put master page in miscellaneous
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

gabarit = master frame :wink:
User avatar
Pablo
 
Posts: 21574
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: master frame problem

Post by Pablo »

If the master frame does to work for you then there must a be a mistake in your settings.
Please carefully look at the settings in the examples. This is the only correct way to do it.
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

it's been months that I'm looking for the right setting.J, have tested all positions but the content place holder is still hiding behind the head holder I really need help I missed a something basic
User avatar
Pablo
 
Posts: 21574
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: master frame problem

Post by Pablo »

To be able to help you, I need to see what you have done.

See also:
viewtopic.php?f=10&t=82134
User avatar
BaconFries
 
 
Posts: 5326
Joined: Thu Aug 16, 2007 7:32 pm

Re: master frame problem

Post by BaconFries »

Have you read the information in the two urls Pablo provided? Whst us us in either of thesethat doesn't help with what you're trying to do!. It may be best if you can provide what your settings are and if possible a copyof your project so it can be viewed and see what you have done.

viewtopic.php?f=10&t=82134
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

thank you for your answer I'm looking for where to publish the frame, because I do not want to touch my site
User avatar
BaconFries
 
 
Posts: 5326
Joined: Thu Aug 16, 2007 7:32 pm

Re: master frame problem

Post by BaconFries »

You can compress it with winzip then upload to your host/server then provide a url so to be able to download or upload to one of the many free file hosts suvh as Mediafire and again provide a url to download.
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

I made a zip of the site .I am in the process of modifying it to create a master page, I worked on the first 4 on 30 pages. The default is that with the publication the content page holder is not at the right position he is under the head.
the file is heavy I will have to remove the photos :|
http://www.mediafire.com/file/ioxvc40kp ... 1.zip/file
User avatar
Pablo
 
Posts: 21574
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: master frame problem

Post by Pablo »

Where exactly do I need to look to see the problem?
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

.Le defaut est qu'a la publication le content page holder n'est pas à la bonne position il est sous la head .pourquoi vous ne voyez pas de probleme?
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

when I publish a parity of the index page is hidden by the header page
User avatar
Pablo
 
Posts: 21574
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: master frame problem

Post by Pablo »

You have used an absolute positioned page header. This means that it will cover all floating elements below it.
Also, layer grids should not be part of a page header, because a page header is for absolute content.

Please remove the layout grid from the header.
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

ok I understood, it's really easier as it really thank you.
Now when I publish the content place holder is wider than the header tand the footer.
And the footer is in the middle of the page
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

ok for the footer i followed the tutorial
I understand better the tutorial now
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

Hello
I would like to make a master frame that looks like the current page of my website. I work on it for several months but I can not do it.
Can we realize a master frame with all the elements of my current page, or must I imagine another layout?
If so can you realize it for me because I am desperate

http://www.mediafire.com/file/k312jnve7 ... e.zip/file
User avatar
Pablo
 
Posts: 21574
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: master frame problem

Post by Pablo »

The master frame in your project seems to work correct.
What is the exact problem?
Can you please be more specific?
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

Yes it works when I do a preview but when I publish it on the vendor the pages that are displayed are destructured, it does not correspond to my layout
pajadt
 
 
Posts: 304
Joined: Sat Mar 16, 2013 11:23 am
Location: Europe
Contact:

Re: master frame problem

Post by pajadt »

Hi Florio
Here is problem in project, because you have invisble part, like in "masterpageLayoutGrid1", where have font Awesome icons which is imvisble, also that have in grid before "LayoutGrid2", where is not visible css menu, so why hapend that, i not know, i that see when begin in one version and update to another version, also must notice one other Tools in WWB which must to use, Page / Error Reports / , Here all must be clean, not must have any mistakes, also i noticed self, somtimes when give handly names not use like this
- masterpageLayoutgrid1 and second
- masterframe_Layoutgrid1
sometimes that give mistakes, so suggestions WWB have that to do auto, with settings in / Tools / HTML- check optioms "Include page name automatically generated ID attributes" and first create master_frame and than when finshed you can uncheck, and he write code with that automatic generated.
Also your image name must like one name not name with space between, image1.jpg not like image 1.jpg. that must also take care about that stuff.
To resume: Best options to create new same deisgn for master_page / Take care about unique names / and other page you can simply copy from existing project
Solve like this and not have any problem, must notice sometnig. when have two object with same ID names, WWB is confused.
User avatar
TREZA13
 
 
Posts: 48
Joined: Fri Aug 31, 2018 4:07 pm
Location: MARIGNANE FRANCE
Contact:

Re: master frame problem

Post by TREZA13 »

Thank you for your reponce I think I understood despite the very poor english english translation of google.
I will try to work on it but I think that I will not be able to do what you explain to me that exceeds my skills.
Post Reply