Single Page Protect dosnt work

Issues related to the Login tools of WYSIWYG Web Builder.
Forum rules
PLEASE READ THE FORUM RULES BEFORE YOU POST:
viewtopic.php?f=12&t=1901

MUST READ:
http://www.wysiwygwebbuilder.com/login_basics.html
http://www.wysiwygwebbuilder.com/login_tools.html

TIP:
A lot of information about the login tools can be found in the help/manual.
Also checkout the demo template that is include with the software.
Post Reply
Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Single Page Protect dosnt work

Post by Tandilwe » Tue Aug 13, 2019 7:18 pm

Hello,

at first i want to say, that the WB is an wonderful program. therefore i upgraded from 14.4.0 to 15.0.4 a couple of days ago.
I started with an existing project in WB 15 wich was build in WB 14 before. The first problem was that some single pages could not opened. so i tried a several times to solve the problem. But it was matter what i tried. So i decided to rebuild the whole project (i have to say, that it was time for it anyway).

All's went good. Then i had set a single page protect for a page in Java-Mode becouse i dont have access on a server and in WB 14 it runs without trouble. It dont worked. the page opened and the Form is there, but nothing happened after entering the password. So i was sarching for a possible solution. I also updated from 15.0.4 to 15.0.5. With no solution. I also tested it in a new project, but that did not work either. No functonality at all.

i couldnt find a solution anywhere. So i hope you can help me.

Best Regards
Tandilwe

User avatar
Pablo
 
Posts: 18729
Joined: Tue Mar 28, 2006 12:00 pm
Location: Europe
Contact:

Re: Single Page Protect dosnt work

Post by Pablo » Tue Aug 13, 2019 8:37 pm

Maybe there is a conflict with other (javascript) code on the page?
To be able to help you, I need a copy of the project file.

Related FAQ:
http://www.wysiwygwebbuilder.com/forum/ ... 10&t=82134

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Wed Aug 14, 2019 7:09 pm

I could create a completely new project, which I have already tried, but this causes exactly the same problem. So a completely blank page with nothing but the Single Page Protect. So I would assume that it is not because of the existing project, right? I've really tested it at least 5 times. As I said, the prompt also opens as it is available by default, but nothing happens when I use the default password and click on the login button. Its the same with an custom password.

User avatar
Pablo
 
Posts: 18729
Joined: Tue Mar 28, 2006 12:00 pm
Location: Europe
Contact:

Re: Single Page Protect dosnt work

Post by Pablo » Wed Aug 14, 2019 8:30 pm

This feature has not changed compared to previous versions.

I have created a test page and this works for me (password: password):
http://wysiwygwebbuilder.com/support/protected.php

To be able to help you I need a copy of your project so I can see all your settings.
http://www.wysiwygwebbuilder.com/forum/ ... 10&t=82134

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Fri Aug 16, 2019 1:58 pm

i dont have a server to publish, so i share it in onedrive under the follwoing link:
https://1drv.ms/u/s!AhInbZ4JVJpKiZomwXm ... w?e=LxLAM0

Its not the project i was talkin about but its the same problem there.

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Fri Aug 16, 2019 2:01 pm

Additional: Your Test-Page is working. I tried it. I also tried it withh WB 14.4.0. It was running as well. Only in WB15 it dosnt work.

User avatar
Pablo
 
Posts: 18729
Joined: Tue Mar 28, 2006 12:00 pm
Location: Europe
Contact:

Re: Single Page Protect dosnt work

Post by Pablo » Fri Aug 16, 2019 2:40 pm

Single page protect does not work in local preview because it requires PHP. So, it must be published to a web server.
This was not different in WB14.

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Fri Aug 16, 2019 3:56 pm

I was using Java-Mode. It worked without problems.

User avatar
Pablo
 
Posts: 18729
Joined: Tue Mar 28, 2006 12:00 pm
Location: Europe
Contact:

Re: Single Page Protect dosnt work

Post by Pablo » Fri Aug 16, 2019 5:11 pm

This feature has not changed.
Do you have a working example (project) of WB14 that does not work in WB15?

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Fri Aug 16, 2019 7:33 pm

Okay, I did the following.
First, I created a page in WB14 that was like your test page. Only a text and protection on it. Then I published this as a wbs file saved and tested. The protection worked.
Then I opened the project in the WB 15 and again published separately. The protection did not work anymore.

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Fri Aug 16, 2019 7:39 pm

I think maybe I should try it on another system. It may well be because of my work system. I still have a notebook, which I can use for it.

User avatar
Pablo
 
Posts: 18729
Joined: Tue Mar 28, 2006 12:00 pm
Location: Europe
Contact:

Re: Single Page Protect dosnt work

Post by Pablo » Fri Aug 16, 2019 8:20 pm

Please make sure you have the latest update (15.0.6).

Tandilwe
 
 
Posts: 8
Joined: Sat Aug 10, 2019 2:15 pm
Location: Hamburg - Germany

Re: Single Page Protect dosnt work

Post by Tandilwe » Fri Aug 16, 2019 9:09 pm

no idea what you've done, but its working now! :shock:
Thank you. :D

PS: I do not know what you did, but it works again now. If you have done anything about my problem, you should include this in the Release Notes.

Post Reply