If I download the 64 bit and install it, will it ovverride the 32 bit - or run alongside - if so, I can try it on a copy of the project?
Website publishing - not working
Forum rules
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
Re: Website publishing - not working
It would be easiest if a true pro (I'm just being a fisherman here) could answer this for once and for all:
// Love is the acceptance of nothing / Account age is no guarantee of efficiency ;-) ->
Above, Beyond, and @wwonderfull! <- Genuinely helps you with a powered up site that counts! Four Times Excellence!
Above, Beyond, and @wwonderfull! <- Genuinely helps you with a powered up site that counts! Four Times Excellence!
Re: Website publishing - not working
It does NOT override the 32 bit.
Alan
Alan
Re: Website publishing - not working
The 64-bit version installs in C:\Program Files.
The 32-bit version installs in C:\Program Files (x86)
They can run alongside each other.
But read the following regarding the 64-bit version:
https://www.wysiwygwebbuilder.com/forum ... =1&t=77283
The 32-bit version installs in C:\Program Files (x86)
They can run alongside each other.
But read the following regarding the 64-bit version:
https://www.wysiwygwebbuilder.com/forum ... =1&t=77283
You said that the project now works so why are you considering the 64-bit version when it seems you are under pressure?alex4orly wrote: ↑Mon Jan 06, 2020 8:23 pm NO, I was to be done by 7:00 am, and I AM NOT YET
I started a new project, and am copying pages from my original project to it, all the master frame menu links are gone...
The original project was already set to Winsock
I am using only the 32 bit version, the things that are written about the 64bit got me concerned and I never tried it.
Yes, the original project is huge - the project file is over 8MB, the new one is only 1.8MB - is that the reason?
If I download the 64 bit and install it, will it ovverride the 32 bit - or run alongside - if so, I can try it on a copy of the project?
Thank you all for your input, will wait and see
Re: Website publishing - not working
I must add:
One thing to be aware of when running both versions is the version that Windows loads when the .wbs file is double-clicked is the version that was installed last.
So if you normally run the 64-bit version but install both versions then it's preferable to always install the 64-bit version last.
It's obviously safer just to open the .wbs file from within WWB.
One thing to be aware of when running both versions is the version that Windows loads when the .wbs file is double-clicked is the version that was installed last.
So if you normally run the 64-bit version but install both versions then it's preferable to always install the 64-bit version last.
It's obviously safer just to open the .wbs file from within WWB.
Re: Website publishing - not working
Thanks for the comments and response.
I have no intention to start with the 64bit now.
But, would like to experiment with it.
Yes, I allways select the web icon first and from it, open the project I want.
One other thing that I am puzzled about, when I imported the pages from my original project into the new blank project, I also imported the master frame, which has in it the menu.
At least half of the menu items were somehow now pointing to the wrong project pages and I have to go through all of them to check...
Why?
Thanks again
I have no intention to start with the 64bit now.
But, would like to experiment with it.
Yes, I allways select the web icon first and from it, open the project I want.
One other thing that I am puzzled about, when I imported the pages from my original project into the new blank project, I also imported the master frame, which has in it the menu.
At least half of the menu items were somehow now pointing to the wrong project pages and I have to go through all of them to check...
Why?
Thanks again
-
-
- Posts: 20
- Joined: Sat Feb 23, 2019 9:39 pm
Re: Website publishing - not working
My website is not uploading new pages. I just get Internet Exception Error 12003 Details: The server returned extended information 200....(cant read anymore),
Closing FTP connection, Removing temporary files, Publish failed, END OF PUBLISH.
I tried to rename the whole website and reloaded the whole thing but only the older pages are visible.
The FTP connection has tested OK. I have contacted my provider but they cant see there is an issue and suggested I contact you guys.
*** START OF PUBLISH ***
Scanning publish folder...
Found 21 file(s).
Initializing FTP connection...
Checking host...
Host was successfully parsed.
Connecting to ftp.narellanprobus.org.au...
Using PASV mode.
Succesfully connected.
Current directory is '/'
Setting remote folder to /public_html...
Status: 550 Can't create directory: File exists
Uploading 'font-awesome.min.css'...
Internet Exception Error 12003
Details:
The server returned extended information
200 TYPE is now 8-bit binary
227 Entering Passive Mode (203,28,48,10,223,210)
552 Disk full - please upload later
Closing FTP connection...
Removing temporary files...
Publish failed!
*** END OF PUBLISH ***
Needing help.
Closing FTP connection, Removing temporary files, Publish failed, END OF PUBLISH.
I tried to rename the whole website and reloaded the whole thing but only the older pages are visible.
The FTP connection has tested OK. I have contacted my provider but they cant see there is an issue and suggested I contact you guys.
*** START OF PUBLISH ***
Scanning publish folder...
Found 21 file(s).
Initializing FTP connection...
Checking host...
Host was successfully parsed.
Connecting to ftp.narellanprobus.org.au...
Using PASV mode.
Succesfully connected.
Current directory is '/'
Setting remote folder to /public_html...
Status: 550 Can't create directory: File exists
Uploading 'font-awesome.min.css'...
Internet Exception Error 12003
Details:
The server returned extended information
200 TYPE is now 8-bit binary
227 Entering Passive Mode (203,28,48,10,223,210)
552 Disk full - please upload later
Closing FTP connection...
Removing temporary files...
Publish failed!
*** END OF PUBLISH ***
Needing help.
Re: Website publishing - not working
The log indicates that the server disk is full:
552 Disk full - please upload later
Re: Website publishing - not working
I am trying to publish a relatively simple web page with a form that has about 10 fields on it and using the PHP processor for form processing. It shows correctly when I preview it, when I publish it there are no errors but when you bring the page up in the browser from the server, only half the page loads.
Also, is there a way to get the current date and time automatically put into an editbox or textarea with the user having to choose it?
Also, is there a way to get the current date and time automatically put into an editbox or textarea with the user having to choose it?
Re: Website publishing - not working
What is the URL of the page?
Also, can you please not 'hijack' another unrelated post?
Also, can you please not 'hijack' another unrelated post?