Hi.
I'm trying to open an old projetc but it fails to open because the conveyerbelt extension. I've douwloaded the dummy extension, renamed, but still not open. I know i have to rename to the exact old name, I tried different ways (Conveyerbelt, ConveyerBelt, CONVEYERBEL, conveyerbelt ...) but none worked. Any suggestion?
FAIL TO OPEN PROJECT
Forum rules
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
-
luishmpaulo
-
- Posts: 134
- Joined: Wed Jan 11, 2012 8:49 pm
- Location: Brazil
- Contact:
Re: FAIL TO OPEN PROJECT
If you are using the 64-bit WWB I think the file is called ConveyerBelt.wbx64
I'm not sure just renaming it to this will work but you could try it.
I'm not sure just renaming it to this will work but you could try it.
-
BaconFries
-
- Posts: 5371
- Joined: Thu Aug 16, 2007 7:32 pm
Re: FAIL TO OPEN PROJECT
If you dont have a copy of the extension you can download from the following Conveyerbelt or from the Extension Manager.
-
luishmpaulo
-
- Posts: 134
- Joined: Wed Jan 11, 2012 8:49 pm
- Location: Brazil
- Contact:
Re: FAIL TO OPEN PROJECT
Thanks!!!
Re: FAIL TO OPEN PROJECT
Should have thought of that!BaconFries wrote: ↑Thu Jan 24, 2019 4:12 pm If you dont have a copy of the extension you can download from the following Conveyerbelt or from the Extension Manager.
