jor_cu3er3Dslider 8.0
- me.prosenjeet
-
- Posts: 1265
- Joined: Mon Dec 24, 2007 1:50 pm
- Location: Lucknow
- Contact:
Jordan,
One request, when ever you update an extension, do not name the topic as "Update 2" rather instead put the date of update like: "Update 29/10/2009" it is easier to keep track in that way
One request, when ever you update an extension, do not name the topic as "Update 2" rather instead put the date of update like: "Update 29/10/2009" it is easier to keep track in that way
Check the new Chat GPT and Malware detect extensions at the link below
Check my WB Extensions
Check my WB Templates
---------------------------------------------------------
www.Lucknowwebs.com
Check my WB Extensions
Check my WB Templates
---------------------------------------------------------
www.Lucknowwebs.com
Hi me.prosenjeet,me.prosenjeet wrote:Jordan,
One request, when ever you update an extension, do not name the topic as "Update 2" rather instead put the date of update like: "Update 29/10/2009" it is easier to keep track in that way
I do understand your point ... BUT ...
one of the reasons I made the index was exactly these date's
I hate ... well that's a bit too strong word . ... I strongly dislike these dates
It is too cluttered for me
so no .. I won't change it to something that I dislike myself!
But I will surely put dates in my update list for you
that way you can easily check against my update number.
which I prefer to it's simplicity ... update 1 ... 2 ... 3 etc.
hope this will help . .
oeps damessiah13 . . not good.damessiah13 wrote:hi, great work!...
I need some help, I am trying to link the images I used on this ext but cant get them to work. They wont go to the assigned websites, when i click on the image, nothing happens.
please update to jor_cu3er3Dslider_update 3, it's fixed.
jor_cu3er3Dslider_update 3
see update list for changes at top.
hmmmmm Limma, you see no difference at all with shader set to flat, phong or none ?
that would be strange . .
it also depend of course on other properties you use
and the image used itself will effect the shader also.
but you should see some change/ difference enabling flat or phong.
try also to change the number property (=number of slices), increase.
if al this still not does anything,
maybe it is possible for you to send me your project, so I can have a closer look myself.
that would be strange . .
it also depend of course on other properties you use
and the image used itself will effect the shader also.
but you should see some change/ difference enabling flat or phong.
try also to change the number property (=number of slices), increase.
if al this still not does anything,
maybe it is possible for you to send me your project, so I can have a closer look myself.
- amrajadhyaksha
-
- Posts: 157
- Joined: Thu Apr 09, 2009 2:26 am
- Location: mumbai
- Contact:
Jordan, will you work with Mootools too?
Great job that you are doing here with jquery and flash.
I am sure you must have seen what mootools has been up to.
Anything on the way?
I am sure you must have seen what mootools has been up to.
Anything on the way?
Re: Jordan, will you work with Mootools too?
tnx amrajadhyaksha!amrajadhyaksha wrote:Great job that you are doing here with jquery and flash.
I am sure you must have seen what mootools has been up to.
Anything on the way?
nope not following motools at all, and yes, got something coming up!
but everytime I think it's done, it throws me another curve . .
but soon . .
this was already requested by me.prosenjeetsubhash365 wrote:Just one small request it would be great
if there is a date on the lastest update
in the subject line.
for example
Extension name Updated*** 17/02/10***
Thanks
please read my answer here page 2 post 9 by me.prosenjeet . I still feel the same about it . .
- pedro-pecker
-
- Posts: 38
- Joined: Thu Feb 26, 2009 2:22 pm
- Location: Devon UK
- me.prosenjeet
-
- Posts: 1265
- Joined: Mon Dec 24, 2007 1:50 pm
- Location: Lucknow
- Contact:
The default time for showing a slide is set to minimum 5. How can I reduce it further to 1 or 2, I need a quick rolling banned and 5 is too high for this.
Check the new Chat GPT and Malware detect extensions at the link below
Check my WB Extensions
Check my WB Templates
---------------------------------------------------------
www.Lucknowwebs.com
Check my WB Extensions
Check my WB Templates
---------------------------------------------------------
www.Lucknowwebs.com
hello dwilson,
1. backgroundcolor
Can not be changed, keep all images equal to the size of the cu3er3Dslider.
(create your own background color for the image).
2. alignment
I did not include alignment in the extension as it made no sense to me.
It only works if the images are of the same size anyway.
So you might as well create alignment on the image itself if needed.
3. lower shadow(?)
If you mean the shadow that's below the cu3er3Dslider, like on the demo-page
I really have no clue ? ... it is not in the user-guide of the author ?
I believe it is just an image used as an effect (.png?).
Because moving over the shadow and right-click, will not show a Flash dialog,
so I think it's not an integrated part of cu3er3Dslider.
4. picture sizing
There is no image (re)sizing.
The best way is to keep the image size equal to the size of the cu3er3Dslider.
Then manoeuvre your image inside that fixed dimension.
Sum to your question(s):
Create the images all with a fixed dimension in ie. Photoshop,
equal to the dimension you set for cu3er3Dslider.
Place the image inside that fixed dimension.
hope this helps you! . .
1. backgroundcolor
Can not be changed, keep all images equal to the size of the cu3er3Dslider.
(create your own background color for the image).
2. alignment
I did not include alignment in the extension as it made no sense to me.
It only works if the images are of the same size anyway.
So you might as well create alignment on the image itself if needed.
3. lower shadow(?)
If you mean the shadow that's below the cu3er3Dslider, like on the demo-page
I really have no clue ? ... it is not in the user-guide of the author ?
I believe it is just an image used as an effect (.png?).
Because moving over the shadow and right-click, will not show a Flash dialog,
so I think it's not an integrated part of cu3er3Dslider.
4. picture sizing
There is no image (re)sizing.
The best way is to keep the image size equal to the size of the cu3er3Dslider.
Then manoeuvre your image inside that fixed dimension.
Sum to your question(s):
Create the images all with a fixed dimension in ie. Photoshop,
equal to the dimension you set for cu3er3Dslider.
Place the image inside that fixed dimension.
hope this helps you! . .
Re: dimentions
Hi pulsonic,pulsonic wrote:with cu3er, when you set the width and height, it states "NOTE: match image dimention with this width."
Please could you tell me to match this width what the number refers to? Is it pixels?
Cheers
Yes, image dimension (pixels) (width/height) equal to cu3er dimension (width/height).
- amrajadhyaksha
-
- Posts: 157
- Joined: Thu Apr 09, 2009 2:26 am
- Location: mumbai
- Contact:
Re: jor_cu3er3Dslider_update 6
Thanks, Jordan, please have a go at it.
Piecemaker 1 was not much, I agree CU3ER was better.
But now CU3ER 1.x is not extendable, and PM2 looks set to go beyond CU3ER 0.9, so yes, we look forward to your go.
BTW, you are our jquery champ, so why not do something about http://tympanus.net/codrops/?
Piecemaker 1 was not much, I agree CU3ER was better.
But now CU3ER 1.x is not extendable, and PM2 looks set to go beyond CU3ER 0.9, so yes, we look forward to your go.
BTW, you are our jquery champ, so why not do something about http://tympanus.net/codrops/?
Re: jor_cu3er3Dslider_update 6
hi audier,
if you mean the cube itself ?
you can not change the red of the cu3er cube color itself, the red color should be covered by the image
that’s why height and width states, match Image dimensions with this width/height
the 'cu3er data' does have a 'cube color (face)' setting,
but that sets the color of the cube while it turns, it's side/face color
if you mean the cube itself ?
you can not change the red of the cu3er cube color itself, the red color should be covered by the image
that’s why height and width states, match Image dimensions with this width/height
the 'cu3er data' does have a 'cube color (face)' setting,
but that sets the color of the cube while it turns, it's side/face color
Re: jor_cu3er3Dslider_update 6
hi JoyceBanal,JoyceBanal wrote:Hello i had used the cu3er extension at the website im creating. may i ask is there a way to place the circled numbers on each slide. Example (1)(2)(3)(4)(5) when i click 1 it goes to slide 1 and when i click 3 it goes to slide 3. Is there any way to place those things. also im using 6 cu3er on the web is there any possible way to set the timings right? this is the web http://premieremedical.zxq.net . Thanks
first of, if it works or not, very creative use of cu3er, very nice thinking . .
1. buttons, nope, cu3er only provides a next/previous setting (maybe try jor_piecemaker)
2. timing, nope, they are 6 independent extensions (I have no access to the flash source file)
sorry!
Re: jor_cu3er3Dslider_update 6
Hi, doesn't seem to want to install in WWB 7.62. Had a recent issue with JW Image Rotator, (same error message, etc) and BaconFries recompiled the extension, now vsn 3.1765 and it now works. Guess there is an issue with 7.62 and some older extesions!
Any chance of a fix and an update as this extension looks like it might just do the job for me.
Running under Vista SP2, 32bit. the error message is 'The process cannot access the file becuase it is being used by another process' - it isn't!
Please topic, viewtopic.php?f=42&t=19695 for info on the Image Rotator as I expect it's the same problem.
Many thanks.
Paul
Follow-up! OK, ignore the above. I placed the extn in the extn folder (where it should be) and tried to install it manually. You need to put the file elsewhere and install it and let WWB put the extn into the correct location, ie it is working fine! cheers, Paul
Any chance of a fix and an update as this extension looks like it might just do the job for me.
Running under Vista SP2, 32bit. the error message is 'The process cannot access the file becuase it is being used by another process' - it isn't!
Please topic, viewtopic.php?f=42&t=19695 for info on the Image Rotator as I expect it's the same problem.
Many thanks.
Paul
Follow-up! OK, ignore the above. I placed the extn in the extn folder (where it should be) and tried to install it manually. You need to put the file elsewhere and install it and let WWB put the extn into the correct location, ie it is working fine! cheers, Paul
Re: jor_cu3er3Dslider_update 6
hi borges,
use opacity to zero or dimension to zero
example: box remove
box initial and hover opacity to zero
or
box height to zero (and no text input)
same for navigation and autoplay etc
use opacity to zero or dimension to zero
example: box remove
box initial and hover opacity to zero
or
box height to zero (and no text input)
same for navigation and autoplay etc
Re: jor_cu3er3Dslider_update 6
hi camelcrush,
it is not possible to have multiple image dimensions with jor_cu3er3Dslider, all images should have the same size
it is not possible to have multiple image dimensions with jor_cu3er3Dslider, all images should have the same size
Re: jor_cu3er3Dslider_update 6
hi Radjesh KlaukeRadjesh Klauke wrote:As you can see it cuts off "cript type="text/javascript">".
Can you please have a look at it?
… yes I see the problem, have seen this before, it happens when external style sheet is used, will fix A.S.A.P
the hand behaviour ? … I will try to add comments on the link, that should stop it, also A.S.A.P . .
Re: jor_cu3er3Dslider_update 6
here you go Radjesh Klauke jor_cu3er3Dslider_update 7
… images can not be set to a specific folder with dataset at the moment
the extension builder does not allow it, so I can not do anything about that … soeOrry!
… images can not be set to a specific folder with dataset at the moment
the extension builder does not allow it, so I can not do anything about that … soeOrry!
Re: jor_cu3er3Dslider_update 6
jor_cu3er3Dslider_update 7
1. fixed: style end broke code (external css style sheet)
2. added: comment on link (prevent hand cursor on empty url)
see top post for complete update history
1. fixed: style end broke code (external css style sheet)
2. added: comment on link (prevent hand cursor on empty url)
see top post for complete update history
Re: jor_cu3er3Dslider_update 7
nope … wrote it in the post above the jor_cu3er3Dslider_update 7 post to you . . (see 3 post up from this one)
the current extension builder does not allow to target a specific folder in dataset . .
the current extension builder does not allow to target a specific folder in dataset . .
Re: jor_cu3er3Dslider_update 7
hi gfreeman11,
does jor_cu3er3Dslider not work, or does it not show in Webbuilder ?
it works without problems here (WB8.0.2)
it should work/show without problems if you have it installed into Webbuilders - system/extensions - folder
does jor_cu3er3Dslider not work, or does it not show in Webbuilder ?
it works without problems here (WB8.0.2)
it should work/show without problems if you have it installed into Webbuilders - system/extensions - folder
Re: jor_cu3er3Dslider_update 7
thank you hinkey, very glad you like!
Re: jor_cu3er3Dslider_update 7
hello hinkey,
PM is disabled on this board, you can contact me by mail jorextensions@telfort.nl
speed ? there is no such property in jor_cu3er3Dslider ?
there is duration and delay … that works here
there is autoplay timer … that works here
can you put up a live example of the problem ?
PM is disabled on this board, you can contact me by mail jorextensions@telfort.nl
speed ? there is no such property in jor_cu3er3Dslider ?
there is duration and delay … that works here
there is autoplay timer … that works here
can you put up a live example of the problem ?
Re: jor_cu3er3Dslider_update 7
hello IeMS,
nope, jor_cu3er3Dslider does not have a pause button specific
but the autoplay symbol (timer) can act as a pause button, when you click on the timer display the slider pauses
you just somehow have to inform the end user of this option ...
nope, jor_cu3er3Dslider does not have a pause button specific
but the autoplay symbol (timer) can act as a pause button, when you click on the timer display the slider pauses
you just somehow have to inform the end user of this option ...
Re: jor_cu3er3Dslider_update 7
you answered it, no, a.f.a.i.k flash will not work on iPad, Apple still don't like Adobe . .IeMS wrote:Ok. Thank you for this. Because this is flash based, are there any devices it does not work on? iPad etc.?
Re: jor_cu3er3Dslider_update 7
I can see why Apple don't like Flash as they don't own it
To be honest I think very similar effects can be achieved with events and javascript nowdays so eventually a third party plugin wont be required as it is now (64bit IE anyone)
This is how Windows is looking in version 8 as I see it, back to basics no fancy live wallpapers or effects and a dumbed down interface so it becomes easier for the enduser, as well as making it faster to run.
To be honest I think very similar effects can be achieved with events and javascript nowdays so eventually a third party plugin wont be required as it is now (64bit IE anyone)
This is how Windows is looking in version 8 as I see it, back to basics no fancy live wallpapers or effects and a dumbed down interface so it becomes easier for the enduser, as well as making it faster to run.
Re: jor_cu3er3Dslider_update 8
jor_cu3er3Dslider update 8
simplified setup ...
1. changed: config.xlm name removed is automatic set by extension id
2. changed: url path for image is automatic removed if empty
3. changed: content is stored in jor_cu3er3Dslider folder
for full update history, new demo and download see top post
simplified setup ...
1. changed: config.xlm name removed is automatic set by extension id
2. changed: url path for image is automatic removed if empty
3. changed: content is stored in jor_cu3er3Dslider folder
for full update history, new demo and download see top post
Re: jor_cu3er3Dslider_update 8
the image load of jor_cu3er3Dslider occurs from the extension ?DavidMoshe wrote:i really like your loading effect on your page ...
if you mean the page load as in the pageloader message, that has nothing to do with jor_cu3er3Dslider
I use that pageloader on pretty much all pages on my - jorextensions.com - site
jor_aniMateMASTERPACKv3.0 is used to do that, you can find that/my extension - HERE
the module that is used is - easy tools | preblock - you can find JMPv3.0 tutorials - HERE - see the basic easy tools | preblock tutorial
hope this helps!
controlling visibility of jor_cu3er3Dslider 8.0 on a RWP
I love this extension and aniMate 3.0.
Is it possible to control the visibility of jor_cu3er3Dslider 8.0 on a responsive webpage?
I've put jor_cu3er3Dslider 8.0 on the default part. I used the aniMate 3.0 to have it move up using onscroll. Everything works fine. Everything scrolls up and fades in as expected.
I create a 768 breakpoint. I get everything set up like the default breakpoint.
When I preview the page in FireFox, The 768 breakpoint works perfectly! I still have a few adjustments to make on the placement of things at the top of the page but it works like I expected.
At first I had just the extension without it being in a layer. Now, I have the jor_cu3er3Dslider 8.0
extension in its own layer in the default and the 768 breakbpoints. Same results.
The default breakpoint works like it should except for one thing: It shows the jor_cu3er3Dslider 8.0 from the default breakpoint as well as the 768 breakpoint. There are two of them running at the same time on the default breakpoint.
This is a link to what I have working so far: http://www.mysmallbusinessally.com/index2.html
And this is a link to my WB program file on dropbox: https://www.dropbox.com/sh/6gyok4170w44 ... JBMba?dl=0
I've read the manual and it appeared the mark default might be the answer but I was never able to get it to work. I would be truly grateful for any insight on this problem.
Is it possible to control the visibility of jor_cu3er3Dslider 8.0 on a responsive webpage?
I've put jor_cu3er3Dslider 8.0 on the default part. I used the aniMate 3.0 to have it move up using onscroll. Everything works fine. Everything scrolls up and fades in as expected.
I create a 768 breakpoint. I get everything set up like the default breakpoint.
When I preview the page in FireFox, The 768 breakpoint works perfectly! I still have a few adjustments to make on the placement of things at the top of the page but it works like I expected.
At first I had just the extension without it being in a layer. Now, I have the jor_cu3er3Dslider 8.0
extension in its own layer in the default and the 768 breakbpoints. Same results.
The default breakpoint works like it should except for one thing: It shows the jor_cu3er3Dslider 8.0 from the default breakpoint as well as the 768 breakpoint. There are two of them running at the same time on the default breakpoint.
This is a link to what I have working so far: http://www.mysmallbusinessally.com/index2.html
And this is a link to my WB program file on dropbox: https://www.dropbox.com/sh/6gyok4170w44 ... JBMba?dl=0
I've read the manual and it appeared the mark default might be the answer but I was never able to get it to work. I would be truly grateful for any insight on this problem.
Re: jor_cu3er3Dslider 8.0
hi ALguy61,
wow, you have got a lot going on at the same time there !
the reason you use two jor_cu3er3Dsliders is because you want to keep them centred, correct, no other reason ?
my next update JMPv3.0 b5.6 has a new centre command for onscroll which is more suitable for RWD design
still working on it, Big update:) - but it can also be done with b5.5, just need some custom code
changes I made:
- transferred code to single JMP instance (not required, just simpler to keep track of things:)
- removed main back of 768 - used main back of default
- removed Layer3/8 and 2nd cu3er
- target single cu3er itself
- centred cu3er w/ custom code
* I guess you could do the same for Layer7 (=menu/logo) - remove the 768 - use the default
hope this solves it, else just shout out!
download project - LINK REMOVED
wow, you have got a lot going on at the same time there !
the reason you use two jor_cu3er3Dsliders is because you want to keep them centred, correct, no other reason ?
my next update JMPv3.0 b5.6 has a new centre command for onscroll which is more suitable for RWD design
still working on it, Big update:) - but it can also be done with b5.5, just need some custom code
changes I made:
- transferred code to single JMP instance (not required, just simpler to keep track of things:)
- removed main back of 768 - used main back of default
- removed Layer3/8 and 2nd cu3er
- target single cu3er itself
- centred cu3er w/ custom code
* I guess you could do the same for Layer7 (=menu/logo) - remove the 768 - use the default
hope this solves it, else just shout out!
download project - LINK REMOVED
Last edited by jordan on Tue Aug 18, 2015 1:59 pm, edited 1 time in total.
Re: jor_cu3er3Dslider 8.0
Unbelievable! I wasn't expecting such a quick response. You totally rock!
That's exactly what I had in mind. I've banged my head against the wall for a couple of days trying to get it to work like that.
I was under the impression that the elements of the two breakpoints needed to be separated from each other. Yes, I was mainly using the two aniMate extension to keep everything centered and I was under the impression that there would have to be one for each breakpoint to control the elements on that breakpoint. I think that I see now that I use one aniMate to control all of the elements and use the visibiltiy check box to control whether it is visible in a particular breakpoint.
I noticed the c() used with some elements. Is this custom code?
In playing around with a copy of the file, I noticed that the visibility checkbox doesn't really affect whether or not Cu3er is displayed in a breakpoint. After I posted last night, I tried other extensions and they had the same result. They would appear on the breakpoint page and the default page. I thought maybe a simpler slideshow would be just as good. Whatever I put on the 768 would appear on the default no matter if the visibility box was checked or unchecked. But it doesn't work vice versa. That seems odd for some reason.
I thought putting the Cu3er in its own layer would make the visibility controllable but that didn't work either. Is there any thing that controls an extension's visibility?
I read through the instruction manual about mark default and thought that might be a possibility. As I understood the manual, you enter an element that would be visible on the default page when the default page is being viewed. And, while that element is in view, the element your adding would not be visible. Is that how it works?
Anyway, I'm elated with the results. Now to get the rest of the website up and running.... It's got to be downhill from here!
Many, many thanks!
That's exactly what I had in mind. I've banged my head against the wall for a couple of days trying to get it to work like that.
I was under the impression that the elements of the two breakpoints needed to be separated from each other. Yes, I was mainly using the two aniMate extension to keep everything centered and I was under the impression that there would have to be one for each breakpoint to control the elements on that breakpoint. I think that I see now that I use one aniMate to control all of the elements and use the visibiltiy check box to control whether it is visible in a particular breakpoint.
I noticed the c() used with some elements. Is this custom code?
In playing around with a copy of the file, I noticed that the visibility checkbox doesn't really affect whether or not Cu3er is displayed in a breakpoint. After I posted last night, I tried other extensions and they had the same result. They would appear on the breakpoint page and the default page. I thought maybe a simpler slideshow would be just as good. Whatever I put on the 768 would appear on the default no matter if the visibility box was checked or unchecked. But it doesn't work vice versa. That seems odd for some reason.
I thought putting the Cu3er in its own layer would make the visibility controllable but that didn't work either. Is there any thing that controls an extension's visibility?
I read through the instruction manual about mark default and thought that might be a possibility. As I understood the manual, you enter an element that would be visible on the default page when the default page is being viewed. And, while that element is in view, the element your adding would not be visible. Is that how it works?
Anyway, I'm elated with the results. Now to get the rest of the website up and running.... It's got to be downhill from here!
Many, many thanks!
Re: jor_cu3er3Dslider 8.0
glad the project is working for you:)
will add to my todo list to see if I can make a better fit for RWD in b5.6
whenever the mark is visible the object is hidden
but I would not recommend using mode enter and animator on the same object at the same time
unless an enter effect is used that has no affect on the animator mode
cheers!
the cen() is a custom function yes, update b5.6 has this as a command (capitalC)ALguy61 wrote:I noticed the c() used with some elements. Is this custom code?
onscroll animator hides/unhides (display) the object that is why it is visible in all breakpoints (if child object is visible)ALguy61 wrote:In playing around with a copy of the file, I noticed that the visibility checkbox doesn't really affect whether or not Cu3er is displayed in a breakpoint. After I posted last night, I tried other extensions and they had the same result. They would appear on the breakpoint page and the default page. I thought maybe a simpler slideshow would be just as good. Whatever I put on the 768 would appear on the default no matter if the visibility box was checked or unchecked. But it doesn't work vice versa. That seems odd for some reason.
will add to my todo list to see if I can make a better fit for RWD in b5.6
the onscroll enter - mark property - can be used to hide the object in the default page yesALguy61 wrote: I read through the instruction manual about mark default and thought that might be a possibility. As I understood the manual, you enter an element that would be visible on the default page when the default page is being viewed. And, while that element is in view, the element your adding would not be visible. Is that how it works?
whenever the mark is visible the object is hidden
but I would not recommend using mode enter and animator on the same object at the same time
unless an enter effect is used that has no affect on the animator mode
cheers!