Dynamic Web Page Lengths
Forum rules
This section is to share tips, tricks and tutorials related to WYSIWYG Web Builder.
Please do not post questions or problems here. They will not be answered.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
viewtopic.php?f=12&t=1901
This section is to share tips, tricks and tutorials related to WYSIWYG Web Builder.
Please do not post questions or problems here. They will not be answered.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
viewtopic.php?f=12&t=1901
Ok I haven't tried any of the above yet, and I suspect this is a non starter - We all know WB5 is a fixed design html builder but is there any way of using a similar principle and adding some manual code tweaks etc to make a page made for say 800 pixels wide , stretch a little more HORIZONTALLY to fill a widescreen so there at least isn't such an obvious gap either side of a centred in browser page?
- Navaldesign
-
- Posts: 862
- Joined: Sat Mar 01, 2008 8:08 pm
- Location: Italy
- Contact:
Yes but that would cause scrolling on a smaller screen res of course. Guess there no way of avoiding a compromise with fixed positioning & WB5.Navaldesign wrote:If you mean if there is a way of automatically increasing the page width to cover the entire screen width, whatever the sceen size/resolution is, the answer is no. But you can make a WB page wider, and set it to whatever width you like, not only 800.
- Navaldesign
-
- Posts: 862
- Joined: Sat Mar 01, 2008 8:08 pm
- Location: Italy
- Contact:
this part is in one page in layer2 and in the other page in layer3 if I see it right. maybe you check this.
Code: Select all
<iframe name="Content" id="InlineFrame1" style="position:absolute;left:207px;top:151px;width:548px;height:120px;z-index:11;" src="http://www.menkom.com/dump/test6/home.php" scrolling="no" frameborder="0" onLoad="this.style.height=0;this.style.height=this.contentWindow.document.body.scrollHeight;Layer2.style.height=parseInt(this.style.height) + (parseInt
(this.style.top) - parseInt(Layer2.style.top)) * 2;Layer3.style.top= parseInt(Layer2.style.top) + parseInt(Layer2.style.height)">Your browser does not support inline frames or is currently configured not to display inline frames.</iframe>
How do i point the iframe to an exteral site ?
This question was the problem you asked ,to link to an externel site and I was also searching how todo this,you found not a solution to this problem you stil link internal because its on your server and that was never a problem.
Maybe somebody els nows how to open an external site in the dynamic iframe?
This question was the problem you asked ,to link to an externel site and I was also searching how todo this,you found not a solution to this problem you stil link internal because its on your server and that was never a problem.
Maybe somebody els nows how to open an external site in the dynamic iframe?
I didn't follow the recent discussion between Eddy and dangermouse, so maybe this is an irrelevant comment.dangermouse wrote:You cannot link your iframe to WWW.GOOGLE.COM or WWW.MICROSOFT.COM because the rest of your website is not hosted on the microsoft.com servers.
Links to external pages must have the http:// prefix.
So http://www.google.com will work, www.google.com doesn't work.
Hi,
Something like this?Take look at page 4;
http://www.splitmedia.nl/loadingdock/dynamicpages/
Hans
Something like this?Take look at page 4;
http://www.splitmedia.nl/loadingdock/dynamicpages/
Hans
U did put on page 4 an iframe and link external to the forum,this works also but you have not the dynamic vieuw in the indexpage ,If we can link external without an extra iframe so that the indexpage expands to the site lenght.haakoo wrote:Hi,
Something like this?Take look at page 4;
http://www.splitmedia.nl/loadingdock/dynamicpages/
Hans
For me is the trick with the extra iframe a good solution.
Hi Eddy,
Depends on how the size of your IFrame is,
Then you can load anything.
The only downside,you cannot control the width or height of the site that loads into the IFrame
Nor can you control,if the developer of the site used a break-out-of-frame script.
But the extra IFrame is a good swift solution
Hans
Depends on how the size of your IFrame is,
Then you can load anything.
The only downside,you cannot control the width or height of the site that loads into the IFrame
Nor can you control,if the developer of the site used a break-out-of-frame script.
But the extra IFrame is a good swift solution
Hans
Here's how you can create an inline frame with a transparent background.
This will allow you to create scrollable text with the background of your main page showing through.
viewtopic.php?t=576
This will allow you to create scrollable text with the background of your main page showing through.
viewtopic.php?t=576
metatron, this dynamic ifame das not work with external pages/websites.
chris_saturn,maybe you are looking for this,but I dont know if u can use this together with the dynamic iframe code:
Sub-pages should open in an Inline Frame
viewtopic.php?t=1445
Or you disable the subpages to get listed in google with robots.txt / metatags dont follow.
chris_saturn,maybe you are looking for this,but I dont know if u can use this together with the dynamic iframe code:
Sub-pages should open in an Inline Frame
viewtopic.php?t=1445
Or you disable the subpages to get listed in google with robots.txt / metatags dont follow.
The first page from your website is at te most servers index, the page extension can html,php,asp etc .
With the php code I cannot help you,but I think you need something like new height is iframe height in the code.
An easy solution is to use the same bg color as the bottom from you bg image than you dont have to expand the height from your image.
With the php code I cannot help you,but I think you need something like new height is iframe height in the code.
An easy solution is to use the same bg color as the bottom from you bg image than you dont have to expand the height from your image.
I dont know if its possible to make it work in xhtml.
You can try with this html doctype:
Empty the doctype in page properties and insert the doctype above in: Page html-->between head tag.
You can try with this html doctype:
Code: Select all
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
Its the same if you use another extension what not works in FF or safari and your extension das not work in google chrome with doctype XHTML
A script what is build for doctype XHTML wil not work in doctype HTML what you can try is to give the doctype an url.
A script what is build for doctype XHTML wil not work in doctype HTML what you can try is to give the doctype an url.
You can try with this html doctype:
Code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
Empty the doctype in page properties (Document type: None) and insert the doctype above in: Page html-->between head tag.
link an external website into the dynamic iframe does not work.
Read from here.
viewtopic.php?t=4060&postdays=0&postorder=asc&start=45
Read from here.
viewtopic.php?t=4060&postdays=0&postorder=asc&start=45
- iamafireman
-
- Posts: 84
- Joined: Mon May 26, 2008 2:41 am
- Location: Tennessee
The new "content place holder" & "master frame" option in WB 6 and above does add some built in dynamic capacity to pages.
but as the original option in this thread no longer works I think this thread really should not be a "sticky" any more or an updated thread with options for dynamic pages replaces it asap.
but as the original option in this thread no longer works I think this thread really should not be a "sticky" any more or an updated thread with options for dynamic pages replaces it asap.
Master pages and content place holders cannot be used together.
Content Placer Holders can only be used in combination with Master Frames.
http://www.wysiwygwebbuilder.com/master_frame.html
Also please do not use this topic for support question which are not related to the original article. It's getting a little confusing this way
Content Placer Holders can only be used in combination with Master Frames.
http://www.wysiwygwebbuilder.com/master_frame.html
Also please do not use this topic for support question which are not related to the original article. It's getting a little confusing this way
Re: Dynamic Web Page Lengths
What you are asking is not possible in a What-You-See-Is-What-You-Get web site editor.
Since all objects are positioned absolute, they cannot be repositioned dynamically based on the content of another object. This can only be done with table based layouts.
Since all objects are positioned absolute, they cannot be repositioned dynamically based on the content of another object. This can only be done with table based layouts.
Re: Dynamic Web Page Lengths
From the author:
My apologies to those who have had difficulties getting this code to work more recently. Indeed, the original code and sample .wbs file, written in 2007, was no longer compatible with later versions of WWB and/or the HTML language. I have found a solution and have replaced the initial zip file with an updated one. The link is repeated here for convenience: http://www.cardiackids.com/wysiwyg/dyna ... length.zip
As before, it has been tested with Internet Explorer.
Good luck on all your projects.
My apologies to those who have had difficulties getting this code to work more recently. Indeed, the original code and sample .wbs file, written in 2007, was no longer compatible with later versions of WWB and/or the HTML language. I have found a solution and have replaced the initial zip file with an updated one. The link is repeated here for convenience: http://www.cardiackids.com/wysiwyg/dyna ... length.zip
As before, it has been tested with Internet Explorer.
Good luck on all your projects.
Re: Dynamic Web Page Lengths
this is because the scrollheight function is not fully supported by all browsers.
i.e. it was introduced later in IE in version 8.
in some browsers you can access it via .contentWindow.document in others via .contentDocument in other browsers is not supported at all and so on....
regards.
i.e. it was introduced later in IE in version 8.
in some browsers you can access it via .contentWindow.document in others via .contentDocument in other browsers is not supported at all and so on....
regards.
Re: Dynamic Web Page Lengths
I think you will be told again by support that is simply not possible with the way WB works - as you know similar questions get asked frequently.
Re: Dynamic Web Page Lengths
You can use Layers to scale objects. However it defeats the whole purpose of the software. WYSIWYG Web Builder is a What-You-See-Is-What-Get web design tool. It was created to design pixel perfect layouts, not fluid layouts. This is extensively document is all available documentation. And it's not our intention to go back to old fashioned (table based) layouts, because then you would no longer be able to overlap objects and also we would have to remove many of the other cool features that make WYSIWYG Web builder what it is today.
If you really want to build fluid layouts then I suggest you take a look at the HTML textbox extension, which is basically a traditional HTML editor which can be used inside your pages.
If you really want to build fluid layouts then I suggest you take a look at the HTML textbox extension, which is basically a traditional HTML editor which can be used inside your pages.
Re: Dynamic Web Page Lengths
Yes, I use it and it is working with latest browser. Check the tutorial section to see what Plabo made available with cms.rlaing wrote:This is an old thread. But anybody has this working in today's modern browsers? If so I would like to give it a shot
Buy Automation Shopping Cart for CMS WEBSHOP + 2.2 Using WB10!
- Use secure gateway to buy using PAYPAL website.
- Use secure gateway to buy using PAYPAL website.